Sealing an LED lighting enclosure or electrical cabinet by hand introduces inconsistency at every step. The RC-D-6-2-J/GSealant Dispensing Machine from Luoyang Ruichuang addresses that directly: it uses FIPFG (Form-In-Place Foam Gasket) technology to deposit PU two-component foam along a CNC-programmed path, forming a continuous gasket bonded to the workpiece surface. Working area 2200 × 1200 × 330 mm. Gasket width adjustable from 5 to 30 mm. The machine is CE and ISO9001 certificated.

The manual assembly of gaskets brings variety in the cutting, placing, pressing and inspection processes. The product running FIPFG eliminates those factors in one automated pass.
The foam is dispensed at a regulated mix ratio and expands in situ and cures adhered to the product surface. No pre-cut gaskets, no tape, no operator-to-operator inconsistency.
The longer the production run, the fewer rejections, the more predictable the material consumption and the less operator intervention per unit – without affecting the product itself.
The machine moves along a preprogrammed dispensing route and distributes PU foam directly on the workpiece. Once dried, the foam provides a flexible, closed cell barrier that is dust, moisture and vibration resistant.
Because the path is CNC-controlled, the gasket shape matches your sealing groove or surface profile precisely. Switching to a different product means selecting a different program — no mechanical tooling change is needed.
Compact working envelope for standard production cells
The 2200 × 1200 × 330 mm mm working area is sized to cover the majority of LED lighting enclosures and industrial cabinet panels without requiring an oversized floor footprint.
CNC path programming for multiple product types
Dispensing paths are stored as programs. Operators switch between products by selecting the corresponding file, which keeps changeover time low in mixed-production environments.
Controlled two-component PU foam dispensing
The system mixes and deposits PU foam at a set ratio. Gasket width is adjustable between 5 mm and 30 mm, giving you consistent bead geometry across every part in the run.
Established mechanical and electrical architecture
The RC-D-6-2-J/G is built on a design that Luoyang Ruichuang has refined since 2002. The electrical and motion systems are well-documented and serviceable by in-house maintenance teams.
CE and ISO 9001 certified
Both certifications apply to the machine of Sealant Dispensing Machine and the manufacturing process behind it.
| Machine Model | Working area (X*Y*Z) | Glue Output | Strip width | Strip height | Cleaning method | Application |
| RC-D-6-2-J/G | 2200*1200*330(mm) Three-axes linkage |
1.0-6.5g/s | 5-30mm | 3-10mm | High pressure multi-point water flush | Cabinets; lighting; automotive; electronics; communication &explosion-proof products and etc. |
LED lighting enclosures
The machine is configured for the sealing geometry and output volumes common in LED housing production, where consistent IP-rated performance is required across large batches.
Electrical cabinets and switchgear
PU foam gaskets formed in place provide dust-tight and moisture-resistant sealing that meets standard enclosure protection requirements for switchgear and control panels.
EV battery packs and automotive components
Battery module sealing requires repeatable gasket geometry and uniform foam expansion. The FIPFG process delivers both without relying on operator skill.
General sheet metal and plastic enclosures
Any enclosure requiring a perimeter seal can be processed on this machine, provided the part fits within the 2200 × 1200 × 330 mm working envelope.

Luoyang Ruichuang was founded in 2002. The firm also offers laser welding, laser cutting, stud welding and flatbed inkjet printing systems and CNC foam sealing and glueing equipment.
All mechanical design, electrical engineering and software development are carried out in-house by the same team that provides commissioning and after-sales servicing. That means the individuals who built the RC-D-6-2-J/G are the people who assist you put it into production.
After sales service includes machine installation , commissioning , operator training and after sales service for the life of the equipment .
Q:What is the product?
A:The product automates the application of sealing materials — such as PU foam or silicone — onto product surfaces. It replaces hand application with a CNC-programmed process that delivers the same bead geometry on every part.
Q:What sealing materials can the RC-D-6-2-J/G handle?
A:This model is configured for PU two-component foam. Other models in the Luoyang Ruichuang range are configured for silicone sealant, RTV silicone, PU sealant, and one-component adhesive materials.
Q:Can I run multiple product types on one machine?
A:Yes. Each product has its own dispensing program stored in the CNC controller. Changing products requires selecting the correct program rather than changing mechanical tooling.
Q:Is the dispensing path customizable to my part geometry?
A:Yes. Paths are created based on your product drawings and stored in the controller. The gasket width can be adjusted within the 5–30 mm range to match your sealing groove specification.
Q:What after-sales support does Luoyang Ruichuang provide?
A:The after-sales team covers installation, commissioning, maintenance, and technical training. Support is provided by the same engineering team involved in machine development and assembly.
To discuss the RC-D-6-2-J/G or share your sealing requirements for Sealant Dispensing Machine, reach us at sales@lyrcautomation.com. We will follow up directly.