Rechargeable Vacuum Suction Lifter

Rechargeable Vacuum Suction Lifter RC-XDD1200-5.5M | Battery‑powered Vacuum Lifter for Panel Handling
Battery capacity: 12 Ah
Load Capacity: 1,200 kg
Applicable sheet size range: 7 x 2 m
Number of suction cups: 12
Suction cup diameter: 250 mm
Total machine weight: Approx. 200 kg
Product Description

Rechargeable Vacuum Suction Lifter RC-XDD1200-5.5M | Battery-Powered for Heavy Panel Handling

The Rechargeable Vacuum Suction Lifter RC-XDD1200-5.5M is a battery-powered material handling tool designed for lifting heavy glass, stone, and metal sheet panels. It carries up to 1,200 kg, uses 12 suction cups at 250 mm diameter, and runs on a 12 Ah lithium-ion battery — covering workpieces up to 7 × 2 m. No external compressor or air hose is required. The unit is manufactured by Luoyang Ruichuang Electrical Equipment Co., Ltd., established in 2002.

Rechargeable Vacuum Suction Lifter

What Is a Rechargeable Vacuum Suction Lifter?

The product is a battery operated handling device which uses an electric vacuum pump to form and maintain a seal between suction pads and a flat surface of the workpiece. This equipment automatically maintains vacuum pressure, compared to the manual pump versions. If pressure drops below the safe level, the pump will automatically restart without human involvement.

Common problems tackled include worker fatigue from frequent physical lifting, surface damage by mechanical clamps and loss of pressure while handling huge or heavy panels.

Key Product Specifications

Parameter Specification
Model RC-XDD1200-5.5M
Load Capacity 1,200 kg
Battery Capacity 12 Ah
Number of Suction Cups 12
Suction Cup Diameter 250 mm
Applicable Sheet Size Up to 7 × 2 m
Machine Weight Approx. 200 kg
Operating Temperature −10 °C to 50 °C
Battery System Lithium-ion rechargeable

Core Product Features

No air hose required. The 12 Ah lithium-ion battery powers the electric vacuum pump directly, allowing full movement freedom on any jobsite without a compressor or trailing hoses.

Automatic pressure retention. If power is temporarily interrupted, the vacuum system continues to hold the load. This matters most during overhead or tilted panel handling where an unexpected pressure drop is a serious concern.

Built-in vacuum monitoring and alarm. A vacuum pressure gauge continuously tracks suction levels. When pressure falls below the safe threshold, an audible and visual alarm alerts the operator.

Single-operator control panel. The simplified control layout is designed for one-person operation, which can reduce labor requirements and speed up installation workflows.

Intelligent pump restart. An integrated pressure sensor detects vacuum loss — including from slightly irregular surfaces — and automatically reactivates the pump to restore the required grip.

Adjustable suction pad layout. The 12 × 250 mm suction cups are compatible with a range of flat, non-porous workpieces. Cup position and quantity can be adjusted to suit different panel dimensions and weights.

Rechargeable Vacuum Suction Lifter

Rechargeable Vacuum Suction Lifter

Suitable Materials and Applications

This lifter is designed for smooth, non-porous flat surfaces. Typical materials include:

  • Float glass and IGUs (insulated glass units) for curtain wall and window installation
  • Granite and marble slabs for stone masonry and landscaping projects
  • Stainless steel and aluminum sheets in metal fabrication and laser-cut panel assembly
  • Ceramic tiles and solid plastic panels for interior fit-out and construction

Construction sites: The auto-restart feature compensates for micro-leaks caused by surface texture or dust when installing large-format glass panels at height.

Industrial workshops: The practical benefit of laser is the ability to move laser cut metal sheets without destroying surface finishes as with mechanical tongs or forklifts.

Stone and tile handling: The continuous pump correction maintains hold on hefty granite slabs when surface roughness causes slight, continual pressure change.

Rechargeable Vacuum Suction Lifter

​​​​​​​

Rechargeable Vacuum Suction Lifter

Quality Control and Testing

Each unit undergoes a series of tests before leaving the factory:

  • Vacuum Retention Test — measures how long the device holds maximum load without power assistance
  • Tensile Strength Test — verifies rubber seal integrity under shear stress
  • Static Load Test — the unit must support 200% of rated capacity for an extended test period
  • Battery Cycle Testing and Short-Circuit Protection Audit — confirms electrical safety across charge cycles

Suction pads of Rechargeable Vacuum Suction Lifter use high-friction EPDM or NBR rubber compounds, which maintain seals on both smooth and semi-textured surfaces. The design safety factor is at least 2:1.

Customization and Configuration Options

The standard configuration includes 12 suction cups at 250 mm diameter for panels up to 7 × 2 m. The following parameters can be adjusted for specific project requirements:

  • Number of suction cups
  • Suction cup position and spacing
  • Frame size and configuration

To receive a recommended configuration, contact the engineering team with your workpiece dimensions, weight, and surface type.

About Luoyang Ruichuang

Luoyang Ruichuang Electrical Equipment Co., Ltd. was established in 2002. The firm creates industrial automation equipment in sheet metal processing, electrical engineering and intelligent manufacturing.

Internal competences are: equipment manufacture, electrical system integration, software development and after sales service. After-sales: Professional after-sales team to provide technical support, maintenance and troubleshooting services after installation and commissioning.

FAQ

Q:What surfaces is this lifter compatible with?

A: It works on smooth non-porous surfaces like as glass, stainless steel, aluminium, stone slabs, ceramic tiles and solid plastic panels. For use on smooth, hard, non-porous surfaces only.

Q:What is the maximum lifting capacity?

A:The RC-XDD1200-5.5M is rated at 1,200 kg. Vertical lifting capacity is typically 20–30% lower than horizontal capacity due to shear force dynamics.

Q:How long does the battery last per charge?

A:A full charge supports approximately 4–8 hours of continuous working. The vacuum holding function consumes low power, so runtime during standby holding between lifts is extended.

Q:Does it have safety alarms?

A: Yeah. The device is equipped with a vacuum pressure gauge and a low-vacuum warning. When the pressure falls below the safe level, an audio and visual alert is triggered.

Q:Can I customise the configuration of the suction cups?

A: Sure. The number, size and location of suction cups may be modified to your workpiece size, shape and weight requirements.

Q:What maintenance does it require?

A: After each usage, clean the rubber pads to eliminate dust and dirt. Regularly clean the hoover filter for clogging and follow the instructions for charging the battery to get the most performance from your battery.

Contact Us

For quotes or configuration inquiries, email sales@lyrcautomation.com. Include your workpiece dimensions, weight, and surface type for Rechargeable Vacuum Suction Lifter for a faster response.