Luoyang Ruichuang Electrical Equipment Co., Ltd. (est. 2002) manufactures a Pneumatic Vacuum Lifter designed for heavy-duty industrial sheet handling. Rated from 500 kg to 1200 kg, with a cylinder bore of 125 mm and a stroke of 1000 mm, this system handles sheet sizes up to 6 × 2 meters. It is operated by compressed air at 0.5-0.8 MPa without needing a battery or electrical power source at the lifting unit – a practical benefit for sites with existing air infrastructure or limited electrical zones.

The negative pressure in the suction cups is created by pressurised air using a Venturi ejector to select, tilt and reposition heavy or surface sensitive components without mechanical clamping.
This concept is completely pneumatic as opposed to electric vacuum lifters. This is perfect for establishments with existing compressed-air networks, dangerous zones or regions where electrical equipment is forbidden.
The equipment handles three typical workplace issues: the physical strain of handling sheets manually, the injuries associated with lifting non-porous loads and the surface damage produced by clamping tools which increases the incidence of product rejection.
| Product Type | Battery-powered vacuum lifter | Pneumatic vacuum lifter |
| Model | RC-XDD800-2M/3.5M/5.5M | RC-XDQ500-2.5M/RC-XDQ800-3.5M/RC-XDQ1200-4M |
| Application Material | Steel Plate, Stainless Steel Plate, Aluminum Plate, Glass, Metal Sheets | |
| Lifting Capacity | 100–1200 kg (Optional) | 100–1200 kg (Optional) |
| Number of Suction Cups | 2–12 pcs (Optional according to lifting capacity) | |
| Suction Cup Diameter | 100–300 mm (Optional) | |
| Maximum Plate Size | Customized according to application requirements | |
| Minimum Plate Thickness | ≥2 mm (Depending on material and surface condition) | |
| Vacuum Pressure | -60 to -80 kPa | |
| Power Supply | AC 220V / 380V, 50/60Hz (Optional) | / |
| Battery Operation | Optional rechargeable battery system | / |
| Control Mode | Electric Control / Remote Control | |
| Rotation Function | Optional 90° / 180° Rotation | |
| Application Industry | Sheet Metal Fabrication, Laser Cutting, Welding, Metal Processing, Steel Fabrication | |
Charging without downtime. The system is in continuous operation as long as you feed in compressed air. There is no battery cycle to worry about, which is important during high-throughput manufacturing shifts.
Fast hoover make and break. The Venturi ejector reacts swiftly at every pick and place cycle, reducing handling time across a whole production shift.
Monitoring of vacuum pressure. An integral alarm gives the operator a warning of the pressure falling below a safe operating limit, giving a warning before any uncontrolled release of load may happen.
Check valve, non-return. The check valve retains vacuum in the reservoir in the event of an air supply interruption, allowing controlled lowering of the workpiece. The length of time that the valve remains closed is contingent upon the reservoir capacity and the rate of leakage . Contact the engineering team for your individual design .
Spark-free lifting head. With no electrical components at the lifting unit, this design is suitable for environments where ignition risk must be controlled.
Three pad materials are available to match different surface and temperature conditions. NBR is suited to general metal and glass handling. Silicone handles elevated-temperature surfaces. Viton is selected where chemical resistance is a priority.
The suction frame uses a modular layout, allowing pad positions to be adjusted for different sheet formats. This is useful when a single production line processes more than one sheet size.
The frame is made of high strength steel or aluminium. The design reduces the number of worn parts thereby lowering the frequency of planned maintenance pauses .

Metal Fabrication, Place stainless steel or aluminium sheets on a laser cutter or plasma cutter. Vacuum gripped sheet surfaces are free of scratches from mechanical clamping equipment.
Glass and glazing manufacturing. Handling of huge architectural glass sheets in production lines. Optional 90 degrees tilt and 360 degrees rotation for vertical glass positioning applications
Sandwich panels, stone slabs. With a rated load range and 6 2 metre sheet capacity, it will handle most common large-format panel sizes used in construction and manufacturing.
Chemical processing & logistics. Palletising of large objects in high moisture or classified explosive-risk settings where electrically driven lifting equipment is prohibited.
The Pneumatic Vacuum Lifter can be integrated with gantry robots, laser cutting machines, and automated production lines through pneumatic control valves and signal feedback connections.

Each product is subjected to a systematic inspection procedure before it is shipped.
Static load tests the strength of the structure at 125% to 200% of rated capacity. Vacuum retention testing tests the functioning of the check valve under vacuum drop during a simulated 10-minute air-loss interval. Suction pads may be tested for shore hardness to ensure they have sufficient sealing contact on different surface textures.
Where required, vacuum reservoirs are examined in accordance with the relevant pressure safety rules. Please reach out to the engineering team directly for documentation on particular test findings or compliance requirements that are applicable to your location.
The following configurations are available based on your production requirements:
Email us at info@lyrcmachine.com with your sheet size, material type and production cycle needs to discuss a configuration for your application. The technical team will analyse your suggestions and offer an appropriate arrangement.
Q: What is the mechanism of holding force of the product?
A:Compressed air operates a Venturi vacuum generator, which produces negative pressure inside the suction cups. The hoover is always on as long as you are supplying air.
Q:What is the air supply requirement?
A: Stable supply of 0.6 to 0.8 MPa required. An air drier and filter upstream of system is advised to protect Venturi nozzles from moisture and particle contamination.
Q:What kind of materials can this lifter lift?
A: Glass, steel plate, stainless steel, aluminium sheet, marble, granite, honeycomb panels and other solid non-porous flat materials. We have high flow vacuum generators for semi-porous surfaces, please contact us with your material spec.
Q:Can it be integrated with automated equipment?
A:Yes. Pneumatic control valves and signal feedback modules allow integration with gantry robots, laser cutting machines, and other automation systems.
Q:Can the suction frame and functions be customized?
Yes. Tilting, rotation, pad layout, and cup arrangement can all be configured to match specific sheet sizes and production workflows.
Q:When should suction pads be replaced?
A:Replace pads when visible cracks appear, when the sealing lip becomes brittle, or when the unit fails a standard 10-minute vacuum retention check. Cleaning the air filter at regular service intervals is also recommended; refer to the maintenance schedule in the product documentation.
Have a specific sheet size or production line requirement for Pneumatic Vacuum Lifter? Send your details to sales@lyrcautomation.com and the engineering team will follow up.