Luoyang Ruichuang Electrical Equipment Co., Ltd. (est. 2002) manufactures a CNC-controlled Pipe Laser Cutting Machine built on fiber laser technology. It processes round tubes, square tubes, rectangular tubes and metal profiles with a precision in placement of ±0.03mm You may choose the laser power from 1kW to 30kW according to the varying thickness of pipe wall. The system can do cutting, slotting, hole creation, bevel cuts up to 45°, and intersecting line profiles – all in one configuration, eliminating the need for several machines in the shop.

The equipment is an industrial CNC with a focused laser beam of fibre for cutting, drilling and profiling of metal tubes in a non-contact mode. The laser beam melts and vaporises material in a programd path to provide clean edges for quick welding.
This approach eliminates tool wear and workpiece deformation, compared to traditional mechanical sawing and drilling. It also prevents manual marking and other processing operations, reducing labour cost and production time.
The fibre laser source operates at 1.064 micron wave length and is delivered by means of flexible fibre optic cables. The wavelength is well suited for treating reflective materials such as aluminium and stainless steel.


Specialized Tube and Profile Machining
It is a machine for round pipes, square tubes, rectangular tubes, angle steel and channel steel. The system is equipped with a pneumatic chuck system with rotation rates up to 120 RPM for steady gripping and precise positioning during the cut.
Multiple processes in one configuration
The workpiece may be turned or flipped to make straight cuts, bevel cuts, hole drilling, notch cutting and intricate intersecting line patterns without repositioning. This integrates numerous typical processing processes into one operation, decreasing floor area and changeover time.
3D Cutting Head for Bevel Operations
More expensive versions have a 3D cutting head that can do bevel cuts up to 45 degrees, a need for weld preparation in structural and mechanical manufacturing.
End-Material Waste Reduction
A three or four chuck feed system continually drives the pipe through the cutting zone minimising the off cut left at the pipe end and hence reducing the raw material cost each batch.
Support for long-pipe processing
Standard pipe length capacity is 6m. Heavy duty variants up to 12 meters with unique support rollers, automated clamping and rotary cutting for long pipe lengths.
Software integration for nesting
The technology may be integrated with professional 3D nesting software like as SigmaTube or Lantek, which turns CAD designs into optimised G-code to minimise material waste throughout production runs.

| Parameter | Specification |
|---|---|
| Laser Type | Fiber Laser |
| Laser Power Range | 1kW – 30kW |
| Positioning Accuracy | ±0.03mm |
| Chuck Rotation Speed | Up to 120 RPM |
| Pipe Types | Round, Square, Rectangular, Profiles |
| Pipe Diameter Range | 20mm – 350mm (larger available on request) |
| Max Pipe Length | Standard 6m / Heavy-duty 12m |
| Bevel Cutting Angle | Up to 45° (3D head models) |
| Chuck System | Pneumatic, 3-chuck or 4-chuck options |
| Compatible Materials | Carbon steel, stainless steel, aluminum, galvanized pipe, alloy profiles |
| Processing Functions | Cutting, drilling, slotting, bevel, intersecting line |
| Control System | CNC Fiber Laser Tube Cutting System |
This system works across a range of metal materials:
Fiber laser sources with back-reflection protection can also process copper and brass without risking damage to the laser source.

This equipment is used in industries that require precise tube fabrication:

Each machine goes through a pre-delivery inspection process before leaving the factory.
The Ballbar Test checks geometric accuracy and axis synchronization between linear movement and chuck rotation. The machine bed, typically built from high-strength cast iron, undergoes thermal stability testing to verify structural consistency during extended production runs.
Optical path calibration uses beam profiling to verify consistent power density at the cutting head. Each unit also undergoes a 48–72 hour dry-run endurance test and a sample cutting evaluation. Surface roughness (Ra) and cut perpendicularity are measured according to DIN EN ISO 9013 standards before factory release.
Luoyang Ruichuang Electrical Equipment Co., Ltd. has been building CNC automation equipment since 2002. The firm combines equipment design, electrical engineering and software development under one roof.
No third-party distributors. The customer buys the product straight from the maker. The after-sales staff is in charge of installation, commissioning, on-site troubleshooting and continuing maintenance. The in-house Automation Training Center provides operator training in CNC and laser system operation when required.
If you are evaluating a pipe laser cutting machine for your production line, contact us to describe your tube dimensions, material types, and expected output — and we will recommend a suitable configuration.


Q:What types of pipes can this machine process?
A: Round tube, square tube, rectangular tube, angle steel, channel steel and other metal profile .
Q: What pipe diameter range can machine support?
A:Standard models range from 20mm to 350mm. Larger diameters are possible according to machine setup.
Q: What cutting shapes can be made on metal pipes?
A: Straight cuts, bevel cuts, hole drilling, notching, intersecting line cuts & complicated surface patterns.
Q:Does the equipment offer automated tube feeding?
A:Standard or option automated feeding chuck, enable automatic feeding, clamping and rotary cutting of long pipes up to 12 meters.
Q:What metal materials can be cut?
A: Carbon steel, stainless steel, aluminium, galvanised pipe and alloy metal profiles. Back-reflection protection may be activated for the processing of copper and brass as well.
Q: Routine maintenance?
A: Daily cleaning of protective lenses and nozzles is suggested. The guiding rails are lubricated monthly and the chiller system is inspected periodically to ensure constant operation.
Have a project requirement or need a quote for Pipe Laser Cutting Machine? Email us at sales@lyrcautomation.com and describe your tube specifications and production volume. We will get back to you promptly.

