The Handheld Laser Welder from Luoyang Ruichuang is a fiber-delivered welding system built for industrial production environments. Available in 1000W, 1500W, 2000W and 3000W versions it can weld metal from 0.5mm to 6mm thick, with the higher power versions able to achieve 8-10mm on carbon and stainless steel. It is appropriate for manufacturers with water-cooling system, wobbling welding head and up to 15-meter fiber optic cable that want consistent weld quality and decrease post-processing labor expenses .

This device is a portable laser welding system with fiber delivery which employs high-energy laser light to precisely join metal pieces. Unlike TIG or MIG welding, it employs a small ergonomic gun head that effortlessly glides around complicated geometries and tight areas.
There are three major production challenges that motivate the implementation of this technology: a lack of trained welders, too much post-weld grinding and distortion of materials on thin sheets. The equipment focuses energy into a narrow beam to accomplish deep penetration with a significantly smaller heat affected zone (HAZ) than traditional arc procedures.
It usually requires little start up training for the operators to create good welds and is an attractive alternative for facilities that want to decrease their reliance on experienced welding personnel.
Water-cooling system for continuous running
A water chiller for industrial use provides a constant temperature of the laser source throughout extended manufacturing shifts. Stable temperature preserves optical components and realizes long daily operation without performance degradation.
Wobble Welding Head Tech
The beam oscillates in a number of patterns, such as circle, line or triangle, to bridge gaps from 0.5mm to 5mm. You can get uniform results while welding, even if the parts are not completely aligned or there are small fit-up gaps.
Clean Welds, Less Secondary Polishing
The weld seams are thin & smooth with no chance of burn-through. This may decrease or remove a downstream polishing step for applications such as stainless steel cabinets and commercial kitchen equipment.
Optional Automatic Wire Feeder
The machine operates without filler wire during most work. An automatic wire feeder is available as standard or optional configuration to improve consistency when filler material is required.
Multi-Function Gun Head Option
With an optional multi-function laser head, one machine can switch between welding, cleaning, and cutting functions — reducing equipment investment for small and medium workshops.
Fiber Laser Source Efficiency
The fiber laser source achieves >30% electro-optical conversion efficiency and is rated for approximately 100,000 hours of operation.

| Model | RC-LW-H1000 | RC-LW-H1500 | RC-LW-H2000 | RC-LW-H3000 |
| Laser Power | 1000W | 1500W | 2000W | 3000W |
| Operating Mode | Continuous/Modulation | |||
| Maximum Modulation Frequency | 20KHz | |||
| Integrated Cable Length | 10-15m(customizable) for BLW-1000/1500/2000; 20m for BLW-3000 | |||
| Laser Type | Fiber Laser | |||
| Laser wavelength | 1070 NM | |||
| Fiber length | 10m | |||
| Scan Width | 0-6mm | |||
| Welding speed | 0~120mm/s | |||
| Weldable Material | Carbon steel, stainless steel, aluminum alloy, copper alloy, titanium alloy, etc. | |||
| Welding Thickness | 0.5-10mm | |||
| Weld Seam requirement | <0.1mm | |||
| Input Voltage | AC220V±10% 1-phase(BLW-1000/1500/2000); AC380V±7%(BLW-3000) | |||
| Cooling Method | Water Cooling | |||
| Machine Dimension | 1200*850*1200(mm) | |||

Quality Control
Each unit goes through structured verification before delivery. Laser power stability is tested to confirm <±1% fluctuation. The fiber source undergoes a 72-hour continuous aging test to verify stable long-term output.
Weld samples are tested for tensile strength to verify penetration depth against ISO 15614-11 references. The safety interlock system is also verified — the laser only activates when the nozzle makes contact with the workpiece.
Gas flow consistency and water-cooling circuit integrity are checked during final inspection to protect optics from contamination and confirm the machine performs correctly under production conditions.

Sheet Metal and Kitchenware Manufacturing
Produces clean weld seams on stainless steel enclosures, sinks, and commercial kitchen equipment with Handheld Laser Welder, reducing the need for post-weld polishing.
Automotive and Transportation
Bonds aluminium alloy body panels and chassis components using high strength bonding in locations where normal welding torches cannot reach.
On-Site Structural Repair and Construction
The device is portable and can weld gigantic advertising signs, steel frames and structural sections outdoors or in the field.
Metal Welding Reflective
To address pore defects, which are common when welding high reflectivity materials by traditional methods, the laser parameters are adjusted for aluminium and copper.
This equipment is a Class 4 laser product. Operators should use OD6+ laser safe eyewear and proper protective apparel. A specialized welding area with suitable enclosures is necessary to avoid inadvertent exposure to the beam.
A safety interlock is included in the tool which prevents firing the beam until the nozzle is grounded against the workpiece, thereby decreasing the possibility of inadvertent fire while handling or placing the tool.
Q:What are the benefits of a water-cooled design compared with an air-cooled laser welder?
A:The water chiller provides stable cooling throughout long shifts, supporting longer continuous working time, more consistent laser output, and better performance when welding thicker materials.
Q:What is the maximum welding thickness?
A:It depends on the laser power selected. At higher power settings, the machine can weld carbon steel and stainless steel up to 8–10mm.
Q:Can it weld aluminum and copper?
A:Yes. Laser parameters are optimized for high-reflective metals like aluminum and copper, producing stable welds with fewer pore defects than standard arc methods.
Q:Does the machine support automatic wire feeding?
A:Yes. A built-in automatic wire feeder is available as standard or optional, reducing manual filler work and improving welding consistency.
Q:Can this machine also perform laser cleaning or cutting?
A:With the optional multi-function laser gun head, one machine can switch between welding, cleaning, and cutting without purchasing separate equipment.
Q:What are the main consumables?
A:The protective lens, copper nozzles, and shielding gas (Argon or Nitrogen) are the main consumables. Protective lens replacement frequency depends on usage intensity.
Have questions about specifications or ordering for Handheld Laser Welder? Reach our team at sales@lyrcautomation.com — we are glad to help with product details, configuration options, and order inquiries.