PU Foam Gasket Dispensing Machine

PU Gasket Dispensing Machine for Enclosures and Cabinets I Model RC-D-7-2-B/G
Technology: FIPFG Foam Sealing Technology
Material: PU Two-Component Foam
Working Area: 2450 × 1250 × 330 mm
Gasket Width: 5–30 mm
Application: Electrical cabinets, automotive parts, EV battery packs, industrial enclosures
Certificate: CE, ISO9001
Product Description

PU Foam Gasket Dispensing Machine for Electrical Enclosures & Cabinets — Automated FIPFG Sealing Solution

Ruichuang (est. 2002) delivers the RC-D-7-2-B/G of PU Foam Gasket Dispensing Machine, a CNC-controlled FIPFG dispensing machine with a 2450 × 1250 × 330 mm working area and gasket widths from 3–30 mm. Seamless PU foam gaskets are created directly on your workpiece using the in-place approach, which eliminates the need for manual gasket placement. This proven sealing method is ideal for electrical cabinets, EV battery packs, and industrial enclosures, and it has an IP67 rating. Made to meet the requirements of ISO9001:2015 and CE (Machinery Directive 2006/42/EC).

PU Foam Gasket Dispensing Machine

How the RC-D-7-2-B/G Works

RC-D-7-2-B/G mixes Polyol and Isocyanate in a regulated stoichiometric ratio using FIPFG technology before spraying it along a CNC-programmed route. The material foams and hardens on the workpiece, creating a seamless gasket that matches the 3D sealing characteristics.

Compared to hand bonding or pre-cut gasket strips, this approach eliminates fitting tolerances, reduces labour, and maintains ±0.02 mm dispensing repeatability across production runs.

Key Technical Specifications of PU Foam Gasket Dispensing Machine

Machine Model Working area (X*Y*Z) Glue Output Strip width Strip height Cleaning method Application
RC-D-7-2-B/G 2450*1250*330(mm)
Three-axes linkage;
Customized working area is available
0.2-6.0g/s 3-30mm 2-10mm High pressure multi-point water flush Cabinets; lighting; automotive; electronics; communication &explosion-proof products and etc.

dispensing machine gasket strip

Six Performance Advantages

1. Single-Pass Gasket Formation

The machine dispenses and forms the gasket in one continuous automated pass. No cutting, no manual placement, no bonding agents. Cycle-to-cycle seal geometry stays consistent even on parts with irregular contours.

2. Integrated Frame Architecture

Electrical cabinet, material supply, and CNC motion systems are all housed within a single enclosed frame — reducing footprint, isolating vibration, and centralizing maintenance access points.

3. RC-7B Proprietary Mixing Head

The RC-7B mixing head was engineered in-house by Ruichuang's R&D team, with optimized A/B mixing chamber geometry to ensure uniform component ratio at output. Ratio deviation directly impacts foam density and long-term seal compression set — the RC-7B holds this to specification across extended production runs.

4. Constant-Temperature Material Circuit

Integrated heating and cooling loops guarantee a consistent temperature of the material throughout operation. PU viscosity is temperature sensitive, therefore a change of ±5°C will affect the mixing ratios and foam expansion behaviour. The circuit maintains the temperature fluctuation to ±1°C.

5. CNC Programming using CAD

Dispensing routes may be created directly from DXF/DWG files or teach-in programming for fast setup on new part geometries. Each task may be changed for width, speed and route with no unique fixtures or tooling adjustments.

6. Verified IP67 Sealing Output

Gaskets produced by this machine have been tested to IEC 60529 IP67 requirements on steel and powder-coated aluminum enclosures. Compression set measures below 5% (tested at 25% compression, 70°C, 24h per ISO 815). Gaskets maintain seal integrity through thermal cycling from −40°C to +85°C and resist hydraulic oil and UV exposure.

pu foam gasket machine details

Material Handling and Process Protection

The machine handles PU foam compositions from 200 to 100,000 mPas – covering light acoustic foams (low viscosity) to thick structural sealing foams (high viscosity). Tack-free duration 3-10 min Full functional cure 20-60 min, depending on formulation and ambient temperature.

Two material protection systems prevent batch-to-batch variation:

  • Automated High-Pressure Water-Flushing — clears residual foam from the RC-6B mixing head after each cycle, preventing cross-contamination and clog-related ratio errors
  • Air-Drying Units + Nitrogen Blanketing — protects the Isocyanate tank from atmospheric moisture, preventing crystallization that degrades reactivity and compromises gasket quality

Quality Verification Protocol

Inspection Area Method
Dispensing Accuracy Laser path tracking + automated A/B weight calibration
Curing Dynamics Skin-time test + Shore 00/A durometer measurement
Adhesion Integrity Cross-cut adhesion test on ABS, PC, powder-coated steel
Environmental Performance IEC 60529 IP rating test + thermal aging per IEC 60068-2-14

All machines of PU Foam Gasket Dispensing Machine pass a full dispensing trial on customer-specified part geometry before shipment.

Application Industries

dispensing machine application

Electrical Enclosures & Switchgear

Dust and moisture protection to IP66/IP67 for control cabinets and distribution panels in industrial applications. Works with normal sheet-metal enclosure designs.

Battery Pack EV

Seals aluminium and composite battery housings that let moisture to reach and damage the cells. The homogeneous bead shape results in an equal compression stress on the housing flanges.

Auto Parts

Constructs acoustic and moisture barriers for door modules, taillights and trim panels. The flexibility of the foam absorbs vibration without losing contact with the substrate.

Exterior LED Lighting

Maintains hermetic seals over many heat cycles (−40°C to +70°C) and direct UV exposure for street lighting and architectural fixture housings.

Panel of industrial control

Protects electronics against coolant mist, dust and chemical vapours in machining and processing settings.

> Working with complex sealing profiles or multi-cavity housings? Contact our engineering team for a dispensing feasibility review.

customer cases of gasket machine

Maintenance Schedule

Task Interval
A/B dosing pump calibration Every 500 operating hours
Mixing tube seal replacement Every 200 operating hours
CNC linear guide lubrication Monthly
Material tank filter inspection Weekly
Full system dispensing accuracy check Quarterly

The automated water-flushing system handles daily mixing head cleaning without operator intervention, reducing scheduled maintenance time by approximately 40% versus solvent-clean systems.

FAQ

Q:What is FIPFG technology and why does it matter for sealing quality?

A: FIPFG (Foam-In-Place Formed Gasket) is the process of dispensing and curing the gasket material directly onto the part, rather than pre-manufacturing and installing it. This removes the dimensional errors between the gasket and the sealing groove to provide a consistent contact pressure across the entire sealing route – an important aspect for dependable IP-rated enclosures.

Q:How does this compare to die-cut or extruded gasket strips?

A:Die-cut and extruded strips require precise groove dimensions and introduce joint gaps at corners. FIPFG gaskets have no joints, conform to irregular surfaces, and reduce gasket installation labor to zero. Material waste is also lower since foam is dispensed only where needed.

Q:What enclosure sizes and geometries can this machine handle?

A: The working space is 2450 × 1250 × 330 mm, which fits most conventional industrial box sizes. The 330 mm CNC Z-axis travel allows for 3D sealing pathways on recessed flanges and stepped coverings.

Q: What PU materials are compatible?

A:Any 2 component polyurethane system (Polyol + Isocyanate) may be treated with viscosity in the range of 200 to 100000 mPas. Ruichuang’s process team may examine your individual formulation for compatibility before machine commissioning.

Q:How quickly can we switch between different part programs?

A:CAD-based programs can be loaded from the machine's library in under two minutes. For new parts, teaching programming typically takes 15–30 minutes depending on path complexity.

Q:What happens if the mixing head clogs mid-production?

A:The machine monitors A/B output pressure in real time. A pressure deviation alert stops the dispensing cycle before a faulty bead is applied. The automated flush cycle then clears the head, and production can resume after operator confirmation.

Contact Us

Need sealing specs, custom sizing, or a sample trial for PU Foam Gasket Dispensing Machine? Email sales@lyrcautomation.com — engineering response within 24 hours.